Perforated Cable Trays
A job site, field adaptable support system primarily for low voltage , telecommunication and fiber optic cables.
|
Type
|
Perforated type cable trays
|
|
Models
|
Inner bend / Outer Bend / Inner U bend / Outer U Bend
|
|
Range of Width
|
50 mm to 1500 mm
|
|
Range of Span
|
2500 mm to 3000 mm
|
|
Sheet Thickness
|
1.5 mm to 3.0 mm
|
|
Range of Height
|
50 mm to 150 mm
|
|
Material
|
Mild Steel, Galvanized Iron, SS304, SS316, Aluminum
|
|
Finish
|
Hot Dip Galvanized, Painted, Powder Coated, Electroplating
|
|
Accessories
|
Horizontal Elbow / Vertical Elbow / Equal & Unequal Tee/ Reducers / Cross
|
LADDER TYPE CABLE TRAY
Solid side rail protection and system strength with smooth radius fittings and a wide selection of materials and finishes.
|
Type
|
Ladder type cable trays
|
|
Models
|
Inner bend / Outer Bend / Inner U bend / Outer U Bend
|
|
Range of Width
|
100 mm to 1500 mm
|
|
Range of Span
|
2500 mm to 3000 mm
|
|
Sheet Thickness
|
1.5 mm to 3.0 mm
|
|
Rung Spacing
|
250mm, 300mm C/c
|
|
Range of Height
|
50 mm to 150 mm
|
|
Material
|
Mild Steel, Galvanized Iron, SS304, SS316, Aluminum
|
|
Finish
|
Hot Dip Galvanized, Painted, Powder Coated, Electroplating
|
|
Accessories
|
Horizontal Elbow / Vertical Elbow / Equal & Unequal Tee/ Reducers /Cross
|
TRUNKING / RACEWAYS TYPE CABLE TRAY
A job site filed adaptable support system primarily for underground purpose of low voltage, telecommunication and data optic fiber cables.
|
Type
|
Trunking / Raceways type cable trays
|
|
Models
|
With Partitions / Without Partitions
|
|
Range of Width
|
50 mm to 600 mm
|
|
Range of Span
|
2500 mm to 3000 mm
|
|
Sheet Thickness
|
1.5 mm to 2.5 mm
|
|
Range of Height
|
50 mm to 100 mm
|
|
Material
|
Mild Steel, Galvanized Iron, SS304, SS316, Aluminum
|
|
Finish
|
Hot Dip Galvanized, Painted, Powder Coated, Electroplating
|
|
Accessories
|
Horizontal Elbow / Vertical Elbow / Equal & Unequal Tee/ Reducers / Cross
|
WIREMESH TYPE CABLE TRAYS
Wire mesh cable management system produced from high mechanical strength steel wires. It is produced by first welding a net, forming the channel, and then finishing after fabrication.
|
Type
|
Wiremesh type cable trays
|
|
Range of Width
|
50 mm to 600 mm
|
|
Range of Span
|
2500 mm to 3000 mm
|
|
Wire Thickness
|
4.5 mm to 6 mm
|
|
Range of Height
|
25 mm to 100 mm
|
|
Material
|
Mild Steel, Galvanized Iron, SS304, SS316, Aluminum
|
|
Finish
|
Hot Dip Galvanized, Painted, Powder Coated, Electroplating
|
METSEC TYPE CABLE TRAYS
This is typical arrangement and approved by Engineers India Limited (EIL) with press fit removable cover used for the installation of Lighting Fixtures.
|
Type
|
Metsec type cable trays
|
|
Range of Width
|
50 mm to 100 mm
|
|
Range of Span
|
2500 mm
|
|
Wire Thickness
|
1.2 mm
|
|
Range of Height
|
50 mm to 100 mm
|
|
Material
|
Mild Steel, Galvanized Iron, SS304, SS316, Aluminum
|
|
Finish
|
Painted, Powder Coated, Electroplating
|